Table of Contents
Advertisement
802.1x Port Commands
Parameters
seconds — The server timeout period in seconds.
Values
transmit-period
Syntax
transmit-period seconds
no transmit-period
Context
config>port>ethernet>dot1x
Description
This command configures the period after which the 7710 SR sends a new EAPOL request message.
The no form of this command returns the value to the default.
Default
30
Parameters
seconds — The server transmit period in seconds.
Values
down-when-looped
Syntax
down-when-looped
Context
config>port>ethernet
Description
This command configures Ethernet loop detection attributes.
dot1x
Syntax
dot1x
Context
config>port>ethernet
Description
This command enables access to the context to configure port-specific 802.1x authentication attributes. This
context can only be used when configuring a Fast Ethernet, gigabit or 10Gig EthernetFast Ethernet, gigabit
or 10Gig EthernetFast Ethernet or gigabit Ethernet LAN ports on an appropriate MDA.
keep-alive
Syntax
keep-alive timer
no keep-alive
Context
config>port>ethernet>dwl
Description
This command configures the time interval between keep-alive PDUs.
Page 234
1 — 300
1 — 300
7710 SR OS Interface Configuration Guide
Advertisement
Table of Contents
