Table of Contents
Advertisement
General Port Commands
ber-sf-link-down
Syntax
[no] ber-sf-link-down
Context
config>port>tdm>ds1>channel-group>ppp
config>port>tdm>e1>channel-group>ppp
Description
This command enables the port down on BER-SF alarm. When enabled, the link will be placed out of
service once ber-sf is detected.
The no form of the command reverts to normal operation where the link remains in-service when ber-sf is
encountered.
Default
no ber-sf-link-down
report-alarm
Syntax
[no] report-alarm [ais] [los] [oof] [rai] [looped]
Context
config>port>tdm> ds3
config>port>tdm> e3
Description
This command enables logging of DS-3 and E-3 alarms for a DS-3/E-3 port or channel.
The no form of this command disables logging of the specified alarms.
Parameters
ais — Reports alarm indication signal errors. When configured, ais alarms are not raised and cleared.
Default
los — Reports loss of signal errors. When configured, los traps are not raised and cleared.
Default
oof — Reports out-of-frame errors. When configured, oof alarms are not raised and cleared.
Default
rai — Reports resource availability indicator events. When configured, rai events are not raised and
cleared.
Default
looped — Reports looped packets errors.
Default
scramble
Syntax
[no] scramble
Context
config>port>tdm>ds1>channel-group
config>port>tdm>ds3
config>port>tdm>e1>channel-group
Page 196
ais alarms are issued
los traps are issued.
oof alarms are not issued.
rai alarms are not issued
looped alarms are not issued
7710 SR OS Interface Configuration Guide
Advertisement
Table of Contents
