Alcatel-Lucent 7710 SR Configuration Manual page 186

Card, MDA, and Port Command Reference
E3 Commands
Page 166
— clock-source {loop-timed | node-timed | adaptive | differential}
— framing (E-1)
— insert-single-bit-error
— [no] invert-data
— loopback {line | internal}
— no loopback
— [no] report-alarm
— [no] shutdown
— signal-mode {cas}
— no signal-mode
— threshold {ber-sd | ber-sf} rate {1 | 5 | 10 | 50 | 100}
— no threshold {ber-sd | ber-sf}
— [no] e3 [sonet-sdh-index]
— atm
— cell-format
— min-vp-vpi
— bert {2e3 | 2e9 | 2e11 | 2e15 | 2e20 | 2e20q | 2e23 | ones | zeros | alter-
nating} duration duration
— no bert
— bit-error-insertion
— no bit-error-insertion
— cisco-hdlc
— down-count
— no down-count
— keepalive
— no keepalive
— up-count
— no up-count
— clock-source {loop-timed | node-timed}
— crc {16 | 32}
— description description-string
— no description
— [no] egress-scheduler-override
— level
— no level
— max-rate
— no max-rate
— egress-scheduler-policy
— encap-type {atm | bcp-null | bcp-dot1q | ipcp | ppp-auto | frame-
relay | wan-mirror | cisco-hdlc | cem}
— [no] feac-loop-respond
— frame-relay
— [no]
— lmi-type
— mode
— n391dte
— no n391dte
— n392dce
7710 SR OS Interface Configuration Guide
{no-crc-g704 | g704 | e1-unframed}
[ais] [los] [oof] [rai] [looped]
{cas}
cell-format
value
rate
down-count
time-interval
up-count
priority-level rate pir-rate [cir cir-rate]
priority-level
rate
port-scheduler-policy-name
frf-12
— egress
— qos-profile profile-id
— no qos-profile
— fragment-threshold threshold
— no fragment-threshold
{ansi | itu | none | rev1}
{dce | dte | bidir}
intervals
threshold