Table of Contents
Advertisement
MDA Commands
All parameters in the MDA context remain and if non-default values are required then their configuration
remains as it is on all existing MDAs.
The no form of this command deletes the MDA/CMA from the configuration. The MDA/CMA must be
administratively shut down before it can be deleted from the configuration.
Default
No MDA/CMA types are configured for any slots by default.
Parameters
mda-type — The type of MDA or CMA selected for the slot postion.
7710: m60-10/100eth-tx, m8-oc3-sfp, m5-1gb-sfp, m2-oc48-sfp, m20-100eth-sfp, m20-1gb-tx, m4-
atmoc12/3-sfp, m20-1gb-sfp, m5-1gb-sfp-b, m4-choc3-as-sfp, c8-10/100eth-tx, c1-1gb-sfp, c8-chds1,
c4-ds3, c2-oc12/3-sfp, c8-atmds1, c1-choc3-ces-sfp, m1-choc12-as-sfp, m12-chds3-as, m4-chds3-as,
m4-choc3-ces-sfp, m10-1gb-xp-sfp, m20-1gb-xp-sfp, m20-1gb-xp-tx
clock-mode
Syntax
clock-mode adaptive
clock-mode differential [timestamp-freq {19440 | 77760 | 103680}]
Context
config>card>mda
Description
This command configures the clock mode and timestamp frequency of the MDA.
The clock mode can only be modified if there are no SAPs associated with the MDA.
Default
none
Parameters
adaptive — Specifies that MDA is in the adaptive clock mode.
differential — Specifies that MDA is in the differential clock mode.
timestamp-freq — Specifies the differential timestamp frequency of the differential clock on the MDA.
Values
ingress
Syntax
ingress
Context
config>card>mda
Description
This command enables the context to configure ingress MDA parameters.
mcast-path-management
Syntax
mcast-path-management
Context
config>card>mda>ingress
Description
This command enables the context to configure local MDA settings for ingress multicast path management.
Page 176
19440, 77760, 103680
7710 SR OS Interface Configuration Guide
Advertisement
Table of Contents
