Alcatel-Lucent 7710 SR Configuration Manual page 426

Port Show Commands
cem
Syntax cem
Context show>port
Description
This command displays CEM encap ports and channels.
Sample Output
*A:NS062480023# show port cem
=============================================================================
Ports on Slot 1
=============================================================================
Port
Id
-----------------------------------------------------------------------------
1/9/1.1.1
1/9/1.1.1.1
1/9/1.1.2
1/9/1.1.2.1
1/9/1.1.3
1/9/1.1.3.1
1/9/1.1.4
...
-----------------------------------------------------------------------------
*A:NS062480023#
lldp
Syntax lldp [nearest-bridge|nearest-non-tpmr|nearest-customer] [remote-info] [detail]
Context show>port>ethernet
Description This command displays Link Layer Discovery Protocol (LLDP) information.
Parameters nearest-bridge — Displays nearest bridge information.
nearest-non-tpmr — Displays nearest Two-Port MAC Relay (TPMR) information.
nearest-customer — Displays nearest customer information.
remote-info — Displays remote information on the bridge MAC.
detail — Shows detailed information.
Sample Output
A:testSr1# show port 1/2/2 ethernet lldp
===============================================================================
Link Layer Discovery Protocol (LLDP) Port Information
===============================================================================
Port 1/2/2 Bridge nearest-bridge
Page 398
Admin Link Port Clock
State State Src
Up No Down adaptive
Up No Down
Up No Down loop-timed
Up No Down
Up No Down node-timed
Up No Down
Up No Down node-timed
7710 SR OS Interface Configuration Guide
Master Clock
Port Id State
1/9/1.1.2.1 hold-over
1/9/1.1.2.1 hold-over