Table of Contents
Advertisement
Port Monitor Commands
Parameters
lag-id — Specifies the LAG ID.
Values
map-to-phy-port
Syntax
map-to-phy-port {ccag ccag-id | lag lag-id | eth-tunnel tunnel-index} {isid isid [end-isid isid] |
service service-id | svc-name [end-service service-id | svc-name]} [summary]
Context
tools>dump
Description
This command provides the ability to respond to a query to provide the link in a LAG/Ethernet tunnel
(loadsharing protection mode)/CCAG that is currently assigned to a given service-id or ISID.
Parameters
lag-id — Specifies the LAG ID.
Values
isid — Specifies the ISID.
Values
service-id — Specifies the service ID.
Values
tunnel-index — Specifies the tunnel index.
Values
ccag-id — Specifies the CCAG ID.
Values
ppp
Syntax
ppp port-id
Context
tools>dump
Description
This command displays PPP information for a port.
Parameters
port-id — Specifies the physical port ID.
Syntax:
Sample Output
*A:sr7# tools dump ppp aps-1.1.1.1
==============================================================================
Id
member of
==============================================================================
looped back
Page 454
1..200
1..200
0..16777215
1..2147483648, 64 char max
1..1024
1..8
slot/mda/port[.channel]
: aps-1.1.1.1
: bpgrp-ppp-1
: no
ppp unit
: 40
dbgMask
: 0x0
7710 SR OS Interface Configuration Guide
Advertisement
Table of Contents
