Alcatel-Lucent 7710 SR Configuration Manual page 221

queue-policy
Syntax queue-policy name
no queue-policy
Context config>card>mda>network>ingress
config>port>sonet-sdh>path>network
Description
This command specifies the network-queue policy which defines queue parameters such as CBS, high
priority only burst size, MBS, CIR and PIR rates, as well as forwarding-class to queue mappings. The
network-queue policy is defined in the config>qos>network-queue context.
Default default
Parameters name — Specifies an exisiting network-queue policy name.
ppp
Syntax ppp
Context config>port>sonet-sdh>path
config>port>tdm>ds1>channel-group
config>port>tdm>ds3
config>port>tdm>e1>channel-group
config>port>tdm>e3
Description
This command enables access to the context to configure the LCP operational parameters for a SONET/
SDH PoS link, a DS--3/E-3 port or channel, a DS-1/E-1 channel or a DS-0 channel.
Default
no ppp
compress
Syntax compress {acfc [pfc] | pfc [acfc]}
no compress
Context config>port>tdm>ds1>channel-group>ppp
config>port>tdm>e1>channel-group>ppp
Description
This command enables and disables Protocol Field Compression (PFC) per RFC 1661, The Point-to-Point
Protocol (PPP), Section 6.5 and Address and Control Field Compression (ACFC) as per Section 6.6.
This command is only supported on DS-1 and E-1 channel groups on ASAP MDAs.
The no form of the command disables the header compression.
Default
no compress
Parameters
acfc — Specifies address and control field compression.
pfc — specifies protocol field compression.
7710 SR OS Interface Configuration Guide
Interface Configuration
Page 195