Table of Contents
Advertisement
no control messages from the sub-ring use the attached ring or VPLS instance. The non-virtual channel
behavior is standard G.8032 capability.
The no form of this command deletes the sub-ring and its virtual channel associations.
Default
no sub-ring
Parameters
virtual-link — Specifies the interconnection is to a ring and a virtual link will be used.
non-virtual-link — Specifies the interconnection is to a ring or a VPLS instance and a virtual link will not be
used.
compatible-version
Syntax
compatible-version value
[no] compatible-version
Context
config>eth-ring
This command configures eth-ring compatibility version for the G.8032 state machine and messages . The
default is version 2 and all 7x50 switches use version 2. If there is a need to interwork with third party
devices that only support version 1 this can be set to version 1.
The [no] form of this command set the compatibility version to 2.
Default
2
Parameters
value — The version 2 of the G.8032 state machine.
interconnect
Syntax
interconnect {ring-id ring-id | vpls}
[no] interconnect
Context
config>eth-ring>sub-ring>interconnect
This command links the G.8032 sub-ring to a ring instance or to a VPLS instance. The ring instance must be
a complete ring with two paths but may itself be a sub-ring or a major ring (declared by its configuration on
another node) . When the interconnection is to another node, the sub-ring may have a virtual link or a non-
virtual-link. When the sub-ring has been configured with a non-virtual link, the sub ring may be alternatively
be connected to a VPLS service. This command is only valid on the interconnection node where a single
sub-ring port connects to a major ring or terminates on a VPLS service.
The no form of this command removes interconnect node.
Default
no interconnect
Parameters
ring-id — Specifies the ring instance of the connection ring for this sub-ring on this node. .
vpls — Specifies that the sub- ring is connected to the VPLS instance that contains the sub-ring SAP.
Values
7710 SR OS Interface Configuration Guide
ring-id: 0-512
Interface Configuration
Page 309
Advertisement
Table of Contents
