Table of Contents
Advertisement
endpoint-discriminator
Syntax
endpoint-discriminator class {ip-address | global-mac-address | null} [discriminator-id
discriminator-id]
no endpoint-discriminator
Context
config>port>ml-bundle>mlppp
Description
This command configures the endpoint-discriminator class and ID. The port must be shutdown to modify
command parameters.
The no form of the command removes the parameters from the configuration.
Parameters
class — Specifies the Link Control Protocol endpoint descriminator class field type.
Values
Default
discriminator-id discriminator-id — Specifies the endpoint discriminator identifier value within the
specified endpoint-discriminator class. The values below are only for the ip-address class.
Values
qos-profile
Syntax
qos-profile profile-id
no qos-profile
Context
config>port>ml-bundle>mlppp>ingress
Description
This command specifies the ingress QoS profile to be used for the incoming traffic over this MLPPP bundle.
Parameters
profile-id — Specifies the ingress QoS profile to be used for the incoming traffic over this MLPPP bundle.
The value can only be modified if the bundle is shutdown.
Values
magic-number
Syntax
[no] magic-number
Context
config>port>ml-bundle>mlppp
Description
This command allows loopback detection to be enabled and disabled for MLPPP bundles. It is disabled by
default. When the magic number option is disabled, the magic number option will not be requested when a
member is trying to bring up the LCP layer on a member link; if the remote peer requests this option, it will
be rejected. When transmitting echo-requests a magic number of 0 is used. When responding to echo-
requests a magic number of 0 is sent.
7710 SR OS Interface Configuration Guide
ip-address, global-mac-address, null
Bundle type
Physical MLPPP bundle
MLPPP bundle protection group
Any valid IP address.
1 — 128
Interface Configuration
Default
ieee802dot1GlobalMacAddress
IP address
Page 251
Advertisement
Table of Contents
