Table of Contents
Advertisement
Default
no keep-alive
Parameters
timer — Specifies the time interval, in seconds, between keep-alive PDUs.
Values
retry-timeout
Syntax
retry-timeout timer
no retry-timeout
Context
config>port>ethernet>dwl
Description
This command configures the minimum wait time before re-enabling port after loop detection.
Default
no retry-timeout
Parameters
timer — Specifies the minimum wait time before re-enabling port after loop detection.
Values
use-broadcast-address
Syntax
[no] use-broadcast-address
Context
config>port>ethernet>dwl
Description
This command specifies whether or not the down when looped destination MAC address is the broadcast
address, or the local port MAC address, as specified in the port's MAC address.
7710 SR OS Interface Configuration Guide
1 — 120
0, 10 — 160
Interface Configuration
Page 235
Advertisement
Table of Contents
