Table of Contents
Advertisement
Port Show Commands
IfIndex
Last State chg
Last State
Change
Configured Mode
Dot1Q Ethertype
QinQ Ethertype
Net. Egr. Queue
Pol
Encap Type
Active Alarms
Auto-negotiate
Alarm State
Collect Stats
Egress Rate
Egress Buf (Acc)
Egress Buf (Net)
Page 372
Label
Displays the interface's index number which reflects its initialization
sequence.
Displays the system time moment that the peer is up.
Displays the system time moment that the MC-LAG group is up.
network — The port is configured for transport network use.
access — The port is configured for service access.
Indicates the Ethertype expected when the port's encapsulation type is
Dot1Q.
Indicates the Ethertype expected when the port's encapsulation type is
QinQ.
Specifies the network egress queue policy or that the default policy is
used.
Null — Ingress frames will not use any tags or labels to delineate a
service.
dot1q — Ingress frames carry 802.1Q tags where each tag signifies
a different service.
The number of alarms outstanding on this port.
True — The link attempts to automatically negotiate the link speed
and duplex parameters.
False — The duplex and speed values are used for the link.
The current alarm state of the port.
Enabled — The collection of accounting and statistical data for the
network Ethernet port is enabled. When applying accounting policies
the data by default will be collected in the appropriate records and
written to the designated billing file.
Disabled — Collection is disabled. Statistics are still accumulated
by the CFM cards, however, the CPU will not obtain the results and
write them to the billing file.
The maximum amount of egress bandwidth (in kilobits per second)
that this Ethernet interface can generate.
The access-buffer policy for the egress buffer.
The network-buffer policy for the egress buffer.
Description (Continued)
7710 SR OS Interface Configuration Guide
Advertisement
Table of Contents
