Table of Contents
Advertisement
Port Show Commands
Link-level
MTU
Admin State
Oper State
Duplex
Hold time up
Hold time down
IfIndex
Phy Link
Configured Mode
Network Qos Pol
Encap Type
Active Alarms
Auto-negotiate
Alarm State
Page 374
Label
Ethernet — The port is configured as Ethernet.
SONET — The port is configured as SONET-SDH
The size of the largest packet which can be sent/received on the Ether-
net physical interface, specified in octets.
Up — The port is administratively up.
Down — The port is administratively down.
Up — The port is operationally up.
Down — The port is operationally down.
Full — The link is set to full duplex mode.
Half — The link is set to half duplex mode.
The link up dampening time in seconds. The port link dampening timer
value which reduces the number of link transitions reported to upper
layer protocols.
The link down dampening time in seconds. The down timer controls
the dampening timer for link down transitions.
Displays the interface's index number which reflects its initialization
sequence.
Yes — A physical link is present.
— A physical link is not present.
No
network — The port is configured for transport network use.
access — The port is configured for service access.
The network QoS policy ID applied to the port.
Null — Ingress frames will not use any tags or labels to delineate a
service.
dot1q — Ingress frames carry 802.1Q tags where each tag signifies
a different service.
The number of alarms outstanding on this port.
True — The link attempts to automatically negotiate the link speed
and duplex parameters.
False — The duplex and speed values are used for the link.
The current alarm state of the port.
Description (Continued)
7710 SR OS Interface Configuration Guide
Advertisement
Table of Contents
