Table of Contents
Advertisement
Multi-Chassis Redundancy Commands
Parameters
ip-address — Specifies the destination IP address.
interface
Syntax
interface ip-int-name
no interface
Context
config>redundancy>mc>peer>mcr>ring>in-band-control-path
Description
This command specifies the name of the IP interface used for the inband control connection. If the name is
not configured, the ring cannot become operational.
service-id
Syntax
service-id service-id
no service-id
Context
config>redundancy>mc>peer>mcr>ring>ibc
config>redundancy>mc>peer>mcr>node>cv
Description
This command specifies the service ID if the interface used for the inband control connection belongs to a
VPRN service. If not specified, the service-id is zero and the interface must belong to the Base router.
The no form of the command removes the service-id from the IBC configuration.
Parameters
service-id — Specifies the service ID if the interface.
Values
path-b
Syntax
[no] path-b
Context
config>redundancy>mc>peer>mcr>ring
Description
This command specifies the set of upper-VLAN IDs associated with the SAPs that belong to path B with
respect to load-sharing. All other SAPs belong to path A.
Default
If not specified, the default is an empty set.
Page 324
service-id:
1 — 2147483647
7710 SR OS Interface Configuration Guide
Advertisement
Table of Contents
