Table of Contents
Advertisement
rate
Syntax
rate {max | kilobits-per-second}
no rate
Context
config>port>ethernet>egress>exp-secondary-shaper
Description
This command is used to configure the shaper's metering and optional profiling rates. The metering rate is
used by the system to configure the shaper's PIR leaky bucket's decrement rat. The decrement function emp-
ties the bucket while packets applied to the bucket attempt to fill it based on the each packets size. If the
bucket fills faster than how much is decremented per packet, the bucket's depth eventually reaches it's vio-
late (PIR) threshold.
The no form of this command is used to restore the default metering and profiling rate to a policer.
Parameters
{max | kilobits-per-second} — Specifying the keyword max or an explicit kilobits-per-second parameter
directly following the rate command is required and identifies the policer's metering rate for the PIR
leaky bucket. When the shaper is first created, the metering rate defaults to max. The kilobits-per-
second value must be expressed as an integer and defines the rate in kilobits-per-second. The integer
value is multiplied by 1,000 to derive the actual rate in bits-per-second.
Values
low-burst-max-class
Syntax
class class-id
no class
Context
config>port>ethernet>egress>exp-secondary-shaper
Description
This command assigns the low burst maximum class to associate with the E
secondary shaper
The no form of the command returns the class id for the E
the default value.
Parameters
class-id — Specifies the class identifier of the low burst max class for the shaper.
Values
class
Syntax
low-burst-max-class class-number rate {kilobits-per-second | max} [monitor-threshold size-in-
kilobytes]
no low-burst-max-class
Context
config>port>ethernet>egress>exp-secondary-shaper
Description
This command specifies the class to associate with the E
7710 SR OS Interface Configuration Guide
1—10000000 kbps
.
1— 32
Interface Configuration
thernet egress expanded
thernet egress expanded secondary shaper
thernet egress expanded secondary shaper
to
.
Page 215
Advertisement
Table of Contents
