Table of Contents
Advertisement
Port Show Commands
==============================================================================
Router/ServiceId
------------------------------------------------------------------------------
Router: Base
Router: Base
------------------------------------------------------------------------------
Interfaces
==============================================================================
A;ALA-1#
Port Frame Relay Output — The following table describes port Frame Relay output fields.
Port Frame Relay Output Fields
Mode
LMI Type
FR Interface
Status
Sample Output
A:ALA-49>config>port# show port 1/1/2 frame-relay
===============================================================================
Frame Relay Info for 1/1/2
===============================================================================
Mode
FR Interface Status
N391 DTE
N392 DTE
N393 DTE
T391 DTE
Tx Status Enquiry
Rx Status Messages
Status Message Timeouts : 0
Discarded Messages
===============================================================================
A:ALA-49>config>port#
Page 388
Label
Displays the mode of the interface. It can be set as Data terminal equip-
ment (dte) or Data circuit-terminating equipment (DCE).
Displays the LMI type.
Displays the status of the Frame Relay interface as determined by the
performance of the dlcmi. If no DLCMI is running, the Frame Relay
interface will stay in the running state indefinitely.
: dte
: fault
: 6
: 3
: 4
: 10
: 0
: 0
: 0
Name
if1000
if2000
Description
LMI Type
N392 DCE
N393 DCE
T392 DCE
Rx Status Enquiry
Tx Status Messages
Status Enquiry Timeouts : 0
Inv. RxSeqNum Messages
7710 SR OS Interface Configuration Guide
Encap Val
1000
2000
: itu
: 3
: 4
: 15
: 0
: 0
: 0
Advertisement
Table of Contents
