Alcatel-Lucent 7710 SR Configuration Manual page 478

Port Monitor Commands
aps
Syntax aps
Context tools>perform
Description This command enables the context to perform Automated Protection Switching (APS) operations.
clear
Syntax clear aps-id {protect | working}
Context tools>perform>aps
tools>dump>aps
Description
This command removes all Automated Protection Switching (APS) operational commands.
Parameters aps-id — This option clears a specific APS on un-bundled SONET/SDH ports.
protect — This command clears a physical port that is acting as the protection circuit for the APS group.
working — This command clears a physical port that is acting as the working circuit for this APS group.
clear
Syntax clear ring-id
Context tools>perform>eth-ring
Description
The Clear command, at the Ethernet Ring Node, is used for the following operations: a) Clearing an active
local administrative command (e.g. Forced Switch or Manual Switch). b) Triggering reversion before the
WTR or WTB timer expires in case of revertive operation. c) Triggering reversion in case of non-revertive
operation.
Parameters
ring-id — This option clears a specific Ethernet Ring.
exercise
Syntax exercise aps-id {protect | working}
Context tools>perform
tools>dump>aps
Description
This command performs an exercise request on the protection or working circuit.
Parameters
aps-id — This option clears a specific APS on un-bundled SONET/SDH ports.
protect — This command performs an exercise request on the port that is acting as the protection circuit for
the APS group.
Page 450 7710 SR OS Interface Configuration Guide