Table of Contents
Advertisement
Configuring Ports
Configuring Cisco HDLC on a Channelized Port
Use the following CLI syntax to configure cHDLC:
CLI Syntax: config# port {port-id |bundle-id |aps-id}
sonet cHDLC
The following example displays SONET/SDH access mode configuration command usage:
Example
Page 146
tdm
ds3 [sonet-sdh-index]
channelized {ds1|e1}
no shutdown
ds1
channel-group channel-group
cisco-hdlc
encap-type {bcp-null|bcp-dot1q|ipcp|ppp-auto|frame-
relay|wan-mirror|cisco-hdlc}
timeslots timeslots
no shutdown
:
A:ALA-29>config>port>tdm# ds3
A:ALA-29>config>port>tdm>ds3# channelized ds1
A:ALA-29>config>port>tdm>ds3# no shutdown
A:ALA-29>config>port>tdm>ds3# exit
A:ALA-29>config>port>tdm# ds1 1
A:ALA-29>config>port>tdm>ds1# no shutdown
A:ALA-29>config>port>tdm>ds1# channel-group 1
A:ALA-29>config>port>tdm>ds1>channel-group# timeslots 1-20
A:ALA-29>config>port>tdm>ds1>channel-group# encap-type cisco-hdlc
A:ALA-29>config>port>tdm>ds1>channel-group# exit
A:ALA-29>config>port>tdm>ds1# channel-group 1
A:ALA-29>config>port>tdm>ds1>channel-group# no shutdown
A:ALA-29>config>port>tdm>ds1>channel-group# exit
A:ALA-29>config>port>tdm>ds1# exit
A:ALA-29>config>port>tdm#
down-count down-count
keepalive time-interval
up-count up-count
7710 SR OS Interface Configuration Guide
Advertisement
Table of Contents
