Table of Contents
Advertisement
idle-payload-fill
Syntax
idle-payload-fill pattern pattern
no idle-payload-fill
idle-payload-fill {all-ones}
Context
config>port>tdm>ds1>channel-group
config>port>tdm>e1>channel-group
Description
This command defines the data pattern to be transmitted when the circuit emulation service is not
operational or temporarily experiences under-run conditions. This command is only valid for cesopsn and
cesopsn-cas circuit emulation services. It is blocked with a warning for unstructured (satop) circuit
emulation services.
Default
all-ones
Parameters
all-ones — Defines the 8 bit value to be transmitted as 11111111.
pattern — Transmits a user-defined pattern.
idle-signal-fill
Syntax
idle-signal-fill {all-ones}
idle-signal-fill pattern pattern
no idle-signal-fill
Context
config>port>tdm>ds1>channel-group
config>port>tdm>e1>channel-group
Description
This command defines the signaling pattern to be transmitted when the circuit emulation service is not
operational or temporarily experiences under-run conditions. This command is only valid for cesopsn-cas
circuit emulation services. It is blocked with a warning for unstructured (satop) and basic cesopsn circuit
emulation services.
Default
all-ones
Parameters
all-ones — Defines the 8 bit value to be transmitted as 11111111.
pattern — Transmits a user-defined pattern.
insert-single-bit-error
Syntax
insert-single-bit-error
Context
config>port>tdm>ds1
config>port>tdm>e1
Description
This command inserts a single bit error for the BERT test.
Default
no bit-error-insertion
7710 SR OS Interface Configuration Guide
Interface Configuration
Page 295
Advertisement
Table of Contents
