Table of Contents
Advertisement
Values
re-authentication
Syntax
[no] re-authentication
Context
config>port>ethernet>dot1x
Description
This command enables / disables periodic 802.1x re-authentication.
When re-authentication is enabled, the 7710 SR will re-authenticate clients on the port every re-auth-period
seconds.
The no form of the command returns the value to the default.
Default
re-authentication
server-timeout
Syntax
server-timeout seconds
no server-timeout
Context
config>port>ethernet>dot1x
Description
This command configures the period during which the 7710 SR waits for the RADIUS server to responds to
its access request message. When this timer expires, the 7710 SR will re-send the access request message,
up to the specified number times.
The no form of this command returns the value to the default.
Default
30
Parameters
seconds — The server timeout period in seconds.
Values
supplicant-timeout
Syntax
supplicant-timeout seconds
no supplicant-timeout
Context
config>port>ethernet>dot1x
Description
This command configures the period during which the 7710 SR waits for a client to respond to its EAPOL
messages. When the supplicant-timeout expires, the 802.1x authentication session is considered to have
failed.
The no form of this command returns the value to the default.
Default
30
7710 SR OS Interface Configuration Guide
1 — 9000
1 — 300
Interface Configuration
Page 233
Advertisement
Table of Contents
