Table of Contents
Advertisement
Values
collect-stats
Syntax
[no] collect-stats
Context
config>port>ethernet>access>egr>qgrp
config>port>ethernet>access>ing>qgrp
config>port>ethernet>network>egr>qgrp
config>port>ethernet>network
config>port>sonet-sdh>path>network
config>port>tdm>ds3>network
config>port>tdm>e1>network
config>port>tdm>e3>network
Description
This command enables the collection of accounting and statistical data for the network interface. When
applying accounting policies, the data, by default, is collected in the appropriate records and written to the
designated billing file.
When the no collect-stats command is issued, the statistics are still accumulated by the CFM cards,
however, the CPU does not obtain the results and write them to the billing file.
If the collect-stats command is issued again (enabled), then the counters written to the billing file will
include the traffic collected while the no collect-stats command was in effect.
Default
no collect-stats
queue-policy
Syntax
queue-policy name
no queue-policy
Context
config>port>ethernet>network
config>port>sonet-sdh>path>network
config>port>tdm>ds1>network
config>port>tdm>ds3>network
config>port>tdm>e1>network
config>port>tdm>e3>network
Description
This command specifies the existing network queue policy which defines queue parameters such as CBS,
high priority only burst size, MBS, CIR and PIR rates, as well as forwarding-class to queue mappings. The
network-queue policy is defined in the config>qos>network-queue context.
Default
default
Parameters
name — Specifies an exisiting network-queue policy name.
7710 SR OS Interface Configuration Guide
1 — 99
Interface Configuration
Page 239
Advertisement
Table of Contents
