Table of Contents
Advertisement
ancillary-override
Syntax
ancillary-override
Context
config>card>mda>ingress>mcast-mgmt
Description
This command enables the context to configure ancillary path bandwidth override parameters.
path-limit
Syntax
path-limit megabits-per-second
no path-limit
Context
config>card>mda>ingress>mcast-mgmt>anc-override
Description
This command overrides the path limits contained in the bandwidth policy associated with the MDA.
The no form of the command removes the path limit override from an ingress multicast path and restores the
path limit defined in the bandwidth policy associated with the MDA.
Parameters
megabits-per-second — Specifies the path limit override to give the upper limit that multicast channels may
use on each path.
Values
bandwidth-policy
Syntax
bandwidth-policy policy-name
no bandwidth-policy
Context
config>card>mda>ingress>mcast-mgmt
Description
This command specifies an existing multicast bandwidth policy. Bandwidth policies are used to manage the
ingress multicast path bandwidth. Each forwarding plane supports multicast forwarding paths into the
switch fabric. Bandwidth policy parameters are configured in the config>mcast-mgmt context.
Parameters
policy-name — Specifies an existing multicast bandwidth policy.
primary-override
Syntax
primary-override
Context
config>card>mda>ingress>mcast-mgmt
Description
This command enables the context to configure primary path limit override parameters.
7710 SR OS Interface Configuration Guide
ancillary-override: 1 — 5000
primary-override: 1 — 2000
secondary-override: 1 — 2000
Interface Configuration
Page 177
Advertisement
Table of Contents
