Table of Contents
Advertisement
Users can selectively enable amber or red alarm thresholds. But if both are enabled (non-zero) then the red
alarm threshold must be greater than the amber alarm threshold.
The no form of the command reverts to the default value.
Default
0
Parameters
percentage — Specifies the amber alarm threshold.
Values
slope-policy
Syntax
slope-policy name
no slope-policy
Context
config>port>access>egress>pool
config>card>mda>access>egress
config>card>mda>access>ingress
config>card>mda>network>egress
config>card>mda>network>ingress
config>port>access>egress>channel>pool
config>port>access>ingress>pool
config>port>network>egress>pool
Description
This command specifies an existing slope policy which defines high and low priority RED slope parameters
and the time average factor. The policy is defined in the config>qos>slope-policy context.
7710 SR OS Interface Configuration Guide
1 — 1000
Interface Configuration
Page 183
Advertisement
Table of Contents
