Dscp (Rip View); Fast-Reroute - HP FlexNetwork 3600 v2 Series Command Reference Manual

dscp (RIP view)

Syntax
dscp dscp-value
undo dscp
View
RIP view
Default level
2: System level
Parameters
dscp-value: Sets the Differentiated Services Code Point (DSCP) value for RIP packets, in the range
of 0 to 63.
Description
Use dscp to set the DSCP value for RIP packets.
Use undo dscp to restore the default.
By default, the DSCP value in RIP packets is 48.
Examples
# Set the DSCP value for RIP packets of RIP process 1 to 63.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1] dscp 63

fast-reroute

Syntax
fast-reroute route-policy route-policy-name
undo fast-reroute
View
RIP view
Default level
2: System level
Parameters
route-policy route-policy-name: References a routing policy to designate a backup next hop. The
route-policy-name argument is a case-sensitive string of 1 to 63 characters.
Description
Use fast-reroute to configure RIP fast reroute (FRR).
Use undo fast-reroute to restore the default.
By default, RIP FRR is disabled.
37