Display Isis Peer - HP FlexNetwork 3600 v2 Series Command Reference Manual

display isis peer

Syntax
display isis peer [ statistics | verbose ] [ process-id | vpn-instance vpn-instance-name ] [ | { begin
| exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
statistics: Displays IS-IS neighbor statistics.
verbose: Displays detailed IS-IS neighbor information. Without the keyword, the command displays
brief IS-IS neighbor information.
process-id: Displays the IS-IS neighbor information of the IS-IS process. The ID is in the range of 1 to
65535.
vpn-instance vpn-instance-name: Displays the IS-IS neighbor information of the MPLS L3VPN.
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the IS-IS
neighbor information of the public network is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display isis peer to display IS-IS neighbor information.
Examples
# Display brief IS-IS neighbor information.
<Sysname> display isis peer
System Id: 1111.1111.1111
Interface: Vlan-interface11
State: Up
System Id: 1111.1111.1111
Interface: Vlan-interface11
State: Up
# Display detailed IS-IS neighbor information.
<Sysname> display isis peer verbose
Peer information for ISIS(1)
----------------------------
HoldTime: 23s
HoldTime: 23s
Peer information for ISIS(1)
Circuit Id: 1111.1111.1112.01
Type: L1(L1L2)
Circuit Id: 1111.1111.1112.01
Type: L2(L1L2)
141
PRI: 64
PRI: 64