Network-Entity - HP FlexNetwork 3600 v2 Series Command Reference Manual

View
IS-IS view
Default level
2: System level
Parameters
number: Maximum number of equal-cost routes, in the range of 1 to 8.
Description
Use maximum load-balancing to configure the maximum number of ECMP routes.
Use undo maximum load-balancing to restore the default.
By default, the maximum number of ECMP routes is 8.
Examples
# Configure the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] isis 100
[Sysname-isis-100] maximum load-balancing 2

network-entity

Syntax
network-entity net
undo network-entity net
View
IS-IS view
Default level
2: System level
Parameters
net: Network Entity Title (NET) in the format of X...X.XXXX....XXXX.00 in hexadecimal notation, with
the first part X...X being the area address, the middle part XXXX....XXXX (a total of 12 "X") being the
router's system ID, and the last part 00 being SEL.
Description
Use network-entity to configure the Network Entity Title for an IS-IS routing process.
Use undo network-entity to delete a NET.
No NET is configured by default.
A NET is a special NSAP address with the SEL being 0. The length of the NET is in the range of 8
bytes to 20 bytes.
A NET comprises the following parts:
•
Area ID. Its length is in the range of 1 to 13 bytes.
•
System ID. A system ID uniquely identifies a host or router in the area and has a fixed 6-byte
length.
•
SEL. It has a value of 0 and a fixed 1-byte length.
For example, a NET is ab.cdef.1234.5678.9abc.00, where area ID is ab.cdef, system ID is
1234.5678.9abc, and SEL is 00.
176