Peer Preferred-Value (Ipv6 Bgp-Vpn Instance View); Peer Public-As-Only (Ipv6 Address Family View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

this document, and the command apply preferred-value preferred-value in
configuration
Examples
# Configure the preferred value as 50 for routes from peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 preferred-value 50

peer preferred-value (IPv6 BGP-VPN instance view)

Syntax
peer ipv6-address preferred-value value
undo peer ipv6-address [ preferred-value ]
View
IPv6 BGP-VPN instance view
Default level
2: System level
Parameters
ipv6-address: IPv6 address of a peer.
value: Preferred value, in the range of 0 to 65535.
Description
Use peer preferred-value to assign a preferred value to routes received from a peer or peer group.
Use undo peer preferred-value to restore the default.
By default, routes received from a peer or peer group have a preferred value of 0.
Routes learned from peers each have an initial preferred value. Among multiple routes to the same
destination, the route with the biggest value is selected.
If you both reference a routing policy and use the command peer ipv6-address preferred-value
value to set a preferred value for routes from a peer, the routing policy sets the specific preferred
value for routes matching it. If the preferred value in the routing policy is zero, the routes use the
value set with the peer ipv6-address preferred-value value command. For how to use a routing
policy to set a preferred value, see the command peer ipv6-address route-policy route-policy-name
{ import | export } in this document, and the command apply preferred-value preferred-value in
"Routing policy configuration
Examples
# Configure the preferred value as 50 for routes from peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family vpn-instance 11
[Sysname-bgp-ipv6-11] peer 1:2::3:4 preferred-value 50

peer public-as-only (IPv6 address family view)

Syntax
peer { ipv6-group-name | ipv6-address } public-as-only
commands."
commands."
395
"Routing policy