HP FlexNetwork 3600 v2 Series Command Reference Manual page 21

include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip routing-table ip-address to display information about routes to a specified
destination address.
Executing the command with different parameters yields different output:
•
display ip routing-table ip-address:
The system ANDs the input destination IP address with the subnet mask in each route entry.
The system ANDs the destination IP address in each route entry with its own subnet mask.
If the two operations yield the same result for an entry and this entry is active, it is displayed.
•
display ip routing-table ip-address mask:
The system ANDs the input destination IP address with the input subnet mask.
The system ANDs the destination IP address in each route entry with the input subnet
mask.
If the two operations yield the same result for an entry and the entry is active with a subnet mask
less than or equal to the input subnet mask, the entry is displayed.
Only route entries that exactly match the input destination address and mask are displayed.
•
display ip routing-table ip-address longer-match:
The system ANDs the input destination IP address with the subnet mask in each route entry.
The system ANDs the destination IP address in each route entry with its own subnet mask.
If the two operations yield the same result for multiple entries that are active, the one with the
longest mask length is displayed.
•
display ip routing-table ip-address mask longer-match:
The system ANDs the input destination IP address with the input subnet mask.
The system ANDs the destination IP address in each route entry with the input subnet
mask.
If the two operations yield the same result for multiple entries with a mask less than or equal to
the input subnet mask, the one that is active with longest mask length is displayed.
Use display ip routing-table ip-address1 { mask-length | mask } ip-address2 { mask-length | mask }
to display route entries with destination addresses within a specified range.
Examples
# Display route entries for the destination IP address 11.1.1.1.
<Sysname> display ip routing-table 11.1.1.1
Routing Table : Public
Summary Count : 4
Destination/Mask
0.0.0.0/0
11.0.0.0/8
11.1.0.0/16
11.1.1.0/24
# Display route entries by specifying a destination IP address and the longer-match keyword.
<Sysname> display ip routing-table 11.1.1.1 longer-match
Routing Table : Public
Summary Count : 1
Proto Pre Cost
Static 60 0
Static 60 0
Static 60 0
Static 60 0
9
NextHop Interface
0.0.0.0 NULL0
0.0.0.0 NULL0
0.0.0.0 NULL0
0.0.0.0 NULL0