Peer Ebgp-Max-Hop (Ipv6 Address Family View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

Description
Use peer dscp to set the DSCP value for IPv6 BGP packets sent to the specified IPv6 BGP peer or
peer group.
Use undo peer dscp to remove the configuration.
By default, the DSCP value in BGP packets is 48.
The IPv6 BGP peer or peer group you specified must have been created.
Examples
# In BGP view, set the DSCP value for IPv6 BGP packets sent to peer group test to 63.
<Sysname] system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test external
[Sysname-bgp-af-ipv6] peer test dscp 63

peer ebgp-max-hop (IPv6 address family view)

Syntax
peer { ipv6-group-name | ipv6-address } ebgp-max-hop [ hop-count ]
undo peer { ipv6-group-name | ipv6-address } ebgp-max-hop
View
IPv6 address family view
Default level
2: System level
Parameters
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
hop-count: Maximum hop count, in the range of 1 to 255. By default, the value is 64.
Description
Use peer ebgp-max-hop to allow establishing the EBGP connection to a peer/peer group indirectly
connected.
Use undo peer ebgp-max-hop to remove the configuration.
By default, this feature is disabled.
You can use the argument hop-count to specify the maximum router hops of the EBGP connection.
Examples
# Allow establishing the EBGP connection with the peer group test on an indirectly connected
network.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test external
[Sysname-bgp-af-ipv6] peer test ebgp-max-hop
386