Isis Timer Csnp - HP FlexNetwork 3600 v2 Series Command Reference Manual

Hide thumbs Also See for FlexNetwork 3600 v2 Series:
Table of Contents

Advertisement

Description
Use isis small-hello to configure the interface to send small hello packets without CLVs.
Use undo isis small-hello to restore the default.
An interface sends standard hello packets by default.
NOTE:
This command is not available in loopback interface view.
Examples
# Configure VLAN-interface 10 to send small Hello packets.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis small-hello

isis timer csnp

Syntax
isis timer csnp seconds [ level-1 | level-2 ]
undo isis timer csnp [ seconds ] [ level-1 | level-2 ]
View
Interface view
Default level
2: System level
Parameters
seconds: Specifies on the DIS of a broadcast network the interval in seconds for sending CSNP
packets, ranging from 1 to 600.
level-1: Applies the interval to Level-1.
level-2: Applies the interval to Level-2.
Description
Use isis timer csnp to specify on the DIS of a broadcast network the interval for sending CSNP
packets.
Use undo isis timer csnp to restore the default.
The default CSNP interval is 10 seconds.
If no level is specified, the CSNP interval applies to both Level-1 and Level-2.
This command only applies to the DIS of a broadcast network, which sends CSNP packets
periodically for LSDB synchronization.
NOTE:
This command is not supported in loopback interface view.
Examples
# Configure Level-2 CSNP packets to be sent every 15 seconds over VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
167

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents