Import-Route Limit (Is-Is View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

Parameters
acl-number: Specifies the number of an ACL that is used to filter routes from Level-2 to Level-1,
ranging from 2000 to 3999. For ACL configuration information, see ACL and QoS Command
Reference.
ip-prefix ip-prefix-name: Specifies the name of an IP prefix list that is used to filter routes from
Level-2 to Level-1, a case-sensitive string of 1 to 19 characters. For IP prefix list configuration
information, see
route-policy route-policy-name: Specifies the name of a routing policy that is used to filter routes
from Level-2 to Level-1, a case-sensitive string of 1 to 63 characters. For routing policy configuration
information, see
tag tag: Specifies a tag value from 1 to 4294967295 for redistributed routes.
Description
Use import-route isis level-2 into level-1 to enable route leaking from Level-2 to Level-1.
Use undo import-route isis level-2 into level-1 to disable routing leaking.
No route leaking is configured by default.
You can specify a routing policy in the import-route isis level-2 into level-1 command to filter
routes from Level-2 to Level-1. Other routing policies specified for route reception and redistribution
does not affect the route leaking.
If a filter policy is configured, only routes passing it can be advertised into the Level-1 area.
Related commands: import-route.
Examples
# Enable route leaking from Level-2 to Level-1.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] import-route isis level-2 into level-1

import-route limit (IS-IS view)

Syntax
import-route limit number
undo import-route limit
View
IS-IS view
Default level
2: System level
Parameters
number: Maximum number of redistributed Level 1/Level 2 IPv4 routes. The default varies with
devices.
Description
Use import-route limit to configure the maximum number of redistributed Level 1/Level 2 IPv4
routes.
Use undo import-route limit to restore the default.
By default, the maximum number of redistributed Level 1/Level 2 IPv4 routes varies with devices.
"Routing policy configuration
"Routing policy configuration
commands."
commands."
158