Peer Fake-As (Bgp/Bgp-Vpn Instance View); Peer Filter-Policy (Bgp/Bgp-Vpn Instance View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 18.10.0.9 group group1
[Sysname-bgp] undo peer 18.10.0.9 enable

peer fake-as (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } fake-as as-number
undo peer { group-name | ip-address } fake-as
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
as-number: Local autonomous system number, in the range of 1 to 4294967295.
Description
Use peer fake-as to configure a fake local AS number for a peer or peer group.
Use undo peer fake-as to remove the configuration.
By default, no fake local AS number is configured for a peer or peer group.
NOTE:
The peer fake-as command is only applicable to an EBGP peer or peer group.
Examples
# In BGP view, configure a fake AS number of 200 for the peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test fake-as 200
# In BGP-VPN instance view, configure a fake AS number of 200 for the peer group test. (The VPN
has been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer test fake-as 200

peer filter-policy (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } filter-policy acl-number { export | import }
undo peer { group-name | ip-address } filter-policy [ acl-number ] { export | import }
241