Import-Route - HP FlexNetwork 3600 v2 Series Command Reference Manual

[Sysname-ripng-100] filter-policy ipv6-prefix Filter1 import
# Configure ACL6 3000 to permit only route 2001::1/128 to pass, and reference ACL6 3000 to filter
incoming RIPng updates.
<Sysname> system-view
[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] rule 10 permit ipv6 source 2001::1 128 destination
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 128
[Sysname-acl6-adv-3000] rule 100 deny ipv6
[Sysname-acl6-adv-3000] quit
[Sysname] ripng 100
[Sysname-ripng-100] filter-policy 3000 import

import-route

Syntax
import-route protocol [ process-id ] [ allow-ibgp ] [ cost cost | route-policy route-policy-name ] *
undo import-route protocol [ process-id ]
View
RIPng view
Default level
2: System level
Parameters
protocol: Specifies a routing protocol from which to redistribute routes. It can be bgp4+, direct,
isisv6, ospfv3, ripng, or static.
process-id: Process ID, in the range of 1 to 65535. The default is 1. This argument is available only
when the protocol is isisv6, ospfv3, or ripng.
cost: Routing metric of redistributed routes, in the range of 0 to 16. If cost value is not specified, the
metric is the default metric specified by the default cost command.
route-policy route-policy-name: Specifies a routing policy by its name with 1 to 63 case-sensitive
characters.
allow-ibgp: Optional keyword when the specified protocol is bgp4+.
Description
Use import-route to redistribute routes from another routing protocol.
Use undo import-route to disable redistributing routes from another routing protocol.
By default, RIPng does not redistribute routes from other routing protocols.
The import-route bgp4+ command redistributes only EBGP routes. The import-route bgp4+
allow-ibgp command redistributes additionally IBGP routes.
Related commands: default cost.
Examples
# Redistribute IPv6-IS-IS routes (process 7) and specify the metric as 7.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] import-route isisv6 7 cost 7
274