Is-Name Map - HP FlexNetwork 3600 v2 Series Command Reference Manual

View
IS-IS view
Default level
2: System level
Parameters
symbolic-name: Specifies a host name for the local IS, a string of 1 to 64 characters.
Description
Use is-name to specify a host name for the IS to enable dynamic system ID to hostname mapping.
Use undo is-name to disable dynamic system ID to hostname mapping.
Dynamic system ID to hostname mapping is not enabled by default.
Examples
# Configure a host name for the local IS.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] is-name RUTA

is-name map

Syntax
is-name map sys-id map-sys-name
undo is-name map sys-id
View
IS-IS view
Default level
2: System level
Parameters
sys-id: System ID or pseudonode ID of a remote IS.
map-sys-name: Specifies a host name for the remote IS, a string of 1 to 64 characters.
Description
Use is-name map to configure a system ID to host name mapping for a remote IS.
Use undo is-name map to remove the mapping.
Each remote IS system ID corresponds to only one name.
Examples
# Map the host name RUTB to the system ID 0000.0000.0041 of the remote IS.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] is-name map 0000.0000.0041 RUTB
172