HP FlexNetwork 3600 v2 Series Command Reference Manual page 211

BGP peer-group is aaa
Remote AS 200
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer AS
2.2.2.1 200
Table 42 Command output
Field
BGP peer-group
Remote AS
type
Maximum allowed prefix number
Threshold
Configured hold timer value
Keepalive timer value
Minimum time between advertisement runs
Peer Preferred Value
No routing policy is configured
Members
Peer
V
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
MsgRcvd MsgSent OutQ PrefRcv Up/Down
0 0
199
State
0 0 00:00:35 Active
Description
Name of the BGP peer group
AS number of peer group
Type of the BGP peer group: IBGP or EBGP
Maximum prefixes allowed to receive from the peer
group
Percentage of received prefixes from the peer group
to maximum prefixes allowed to receive from the
peer group; If the percentage is reached, the system
generates alarm messages.
Holdtime interval
Keepalive interval
Minimum interval for route advertisements
Preferred value specified for the routes from the peer
No routing policy is configured.
Detailed information of the members in the peer
group
IPv4 address of the peer
BGP version running on the peer
AS number of the peer
Number of messages received
Number of messages sent
Number of messages to be sent
Number of prefixes received
Lasting time of the session/Lasting time of the
current state (when no session is established)