Ospfv3 Dr-Priority; Ospfv3 Ipsec-Policy - HP FlexNetwork 3600 v2 Series Command Reference Manual

ospfv3 dr-priority

Syntax
ospfv3 dr-priority priority [ instance instance-id ]
undo ospfv3 dr-priority [ priority ] [ instance instance-id ]
View
Interface view
Default level
2: System level
Parameters
priority: DR priority, in the range of 0 to 255.
instance-id: ID of the instance an interface belongs to, in the range of 0 to 255, which defaults to 0.
Description
Use ospfv3 dr-priority to set the DR priority for an interface in an instance.
Use undo ospfv3 dr-priority to restore the default value.
The DR priority on an interface defaults to 1.
An interface's DR priority determines its privilege in DR/BDR selection, and the interface with the
highest priority is preferred.
Examples
# Set the DR priority for an interface in instance 1 to 8.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospfv3 dr-priority 8 instance 1

ospfv3 ipsec-policy

Syntax
ospfv3 ipsec-policy policy-name [ instance instance-id ]
undo ospfv3 ipsec-policy policy-name [ instance instance-id ]
View
Interface view
Default level
2: System level
Parameters
policy-name: IPsec policy name, a string of 1 to 15 characters.
instance-id: ID of the instance of the interface, in the range of 0 to 255. It defaults to 0.
Description
Use ospfv3 ipsec-policy to apply an IPsec policy on an OSPFv3 interface.
Use undo ospfv3 ipsec-policy to remove the IPsec policy from the OSPFv3 interface.
By default, no IPsec policy is applied on an OSPFv3 interface.
319