Display Bgp Ipv6 Routing-Table As-Path-Acl - HP FlexNetwork 3600 v2 Series Command Reference Manual

Field
Ogn

display bgp ipv6 routing-table as-path-acl

Syntax
display bgp ipv6 routing-table as-path-acl as-path-acl-number [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
as-path-acl-number: Number of an AS path ACL permitted by which to display routing information,
ranging from 1 to 256.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 routing-table as-path-acl to display routes filtered through the specified AS
path ACL.
Examples
# Display routes filtered through the AS path ACL 20.
<Sysname> display bgp ipv6 routing-table as-path-acl 20
BGP Local router ID is 30.30.30.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
*> Network : 30:30::
NextHop : 30:30::30:1
PrefVal : 0
Description
ORIGIN attribute of the route, which can take on one of the following values:
•
i—Indicates that a route is interior to the AS.
•
Summary routes and the routes configured using the network command are
considered IGP routes.
•
e—Indicates that a route is learned from the exterior gateway protocol (EGP).
•
?—Short for INCOMPLETE. It indicates that the origin of a route is unknown
and the route is learned by other means. BGP sets ORIGIN attribute of routes
learned from other IGP protocols to INCOMPLETE.
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
361
PrefixLen : 64
LocPrf :
Label : NULL