HP FlexNetwork 3600 v2 Series Command Reference Manual page 317

Default level
1: Monitor level
Parameters
process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
ipv6-address: IPv6 address prefix.
prefix-length: Prefix length, in the range of 0 to 128.
abr-routes: Displays routes to ABR.
asbr-routes: Displays routes to ASBR.
all: Displays all routes.
statistics: Displays the OSPFv3 routing table statistics .
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospfv3 routing to display OSPFv3 routing table information.
If no process is specified, routing table information of all OSPFv3 processes is displayed.
Examples
# Display OSPFv3 routing table information.
<Sysname> display ospfv3 routing
E1 - Type 1 external route,
E2 - Type 2 external route,
------------------------------------------------------------------------
*Destination: 2001::/64
Type
NextHop
Table 73 Command output
Field
Destination
Type
Cost
Next-hop
Interface
# Display the statistics of OSPFv3 routing table.
<Sysname> display ospfv3 routing statistics
OSPFv3 Router with ID (1.1.1.1) (Process 1)
: I
: directly-connected
OSPFv3 Router with ID (1.1.1.1) (Process 1)
IA - Inter area route,
* - Selected route
Description
Destination network segment
Route type
Route cost value
Next hop address
Outbound interface
305
I - Intra area route
Cost : 1
Interface: Vlan11