HP FlexNetwork 3600 v2 Series Command Reference Manual page 16

RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0
State: Active Adv
Tag: 0
Destination: 192.168.0.1/32
Protocol: Direct
Preference: 0
IpPrecedence:
NextHop: 127.0.0.1
BkNextHop: 0.0.0.0
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0
State: Active NoAdv
Tag: 0
Displayed first are statistics for the whole routing table, followed by a detailed description of each
route (in sequence).
Table 2 Command output
Field
Destination
Protocol
Process ID
Preference
Cost
IpPrecedence
QosLcId
NextHop
Interface
BkNextHop
BkInterface
RelyNextHop
Neighbor
Tunnel ID
Label
BKTunnel ID
BKLabel
Neighbor : 0.0.0.0
Label: NULL
BKLabel: NULL
Process ID: 0
Cost: 0
QosLcId:
Interface: InLoopBack0
BkInterface:
Neighbor : 0.0.0.0
Label: NULL
BKLabel: NULL
Description
Destination address/mask length.
Protocol that presents the route.
Process ID.
Priority of the route.
Cost of the route.
IP precedence.
QoS-local ID.
Address of the next hop on the route.
Outbound interface for packets to be forwarded along the route.
Backup next hop.
Backup outbound interface.
Next hop address obtained through routing recursion.
Neighboring address determined by routing protocol.
Tunnel ID.
Label.
Backup tunnel ID.
Backup label.
Age: 06h46m35s
Age: 06h46m35s
4