Display Bgp Ipv6 Routing-Table - HP FlexNetwork 3600 v2 Series Command Reference Manual

Table 87 Command output
Field
ORF ipv6-prefix entries
index
rule
prefix
ge
le

display bgp ipv6 routing-table

Syntax
display bgp ipv6 routing-table [ ipv6-address prefix-length ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-address: Destination IPv6 address.
prefix-length: Prefix length of the IPv6 address, in the range of 0 to 128.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 routing-table to display IPv6 BGP routing table information.
Examples
# Display the IPv6 BGP routing table.
<Sysname> display bgp ipv6 routing-table
Total Number of Routes: 2
BGP Local router ID is 30.30.30.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
Description
Number of ORF prefix entries.
Index of a prefix entry.
Matching rule of the prefix.
Prefix information.
greater-equal, indicating the mask length must be greater than or equal to the
specific value.
less-equal, indicating the mask length must be less than or equal to the specific
value.
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
359