Bestroute As-Path-Neglect (Ipv6 Address Family View); Bestroute Compare-Med (Ipv6 Address Family View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

bestroute as-path-neglect (IPv6 address family view)

Syntax
bestroute as-path-neglect
undo bestroute as-path-neglect
View
IPv6 address family view
Default level
2: System level
Parameters
None
Description
Use bestroute as-path-neglect to configure the IPv6 BGP router to not evaluate the AS_PATH
during best route selection.
Use undo bestroute as-path-neglect to configure the IPv6 BGP router to use the AS_PATH during
best route selection.
By default, the router takes AS_PATH as a factor when selecting the best route.
Examples
# Ignore AS_PATH in route selection.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] bestroute as-path-neglect

bestroute compare-med (IPv6 address family view)

Syntax
bestroute compare-med
undo bestroute compare-med
View
IPv6 address family view
Default level
2: System level
Parameters
None
Description
Use bestroute compare-med to enable the comparison of the MED for paths from each AS.
Use undo bestroute compare-med to disable this comparison.
This comparison is not enabled by default.
After the bestroute compare-med command is executed, the balance command does not take
effect.
345