Display Ospfv3 Peer - HP FlexNetwork 3600 v2 Series Command Reference Manual

|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospfv3 next-hop to display OSPFv3 next hop information.
If no process is specified, next hop information of all OSPFv3 processes is displayed.
Examples
# Display OSPFv3 next hop information.
<Sysname> display ospfv3 next-hop
Neighbor-Id
1.1.1.1
Table 65 Command output
Field
Neighbor-Id
Next-hop
Interface
RefCount

display ospfv3 peer

Syntax
display ospfv3 [ process-id ] [ area area-id ] peer [ [ interface-type interface-number ] [ verbose ] |
peer-router-id ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
area: Specifies to display neighbor information of the specified area.
area-id: The ID of an area, a decimal integer that is translated into IPv4 address format by the system
(in the range of 0 to 4294967295) or an IPv4 address.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Display detailed neighbor information.
peer-router-id: Router-ID of the specified neighbor.
OSPFv3 Router with ID (2.2.2.2) (Process 1)
Next-Hop
FE80::20F:E2FF:FE00:1
Interface
Vlan11
Description
Neighboring router ID
Next-hop address
Outbound interface
Reference count
298
RefCount
1