Display Isis Spf-Log - HP FlexNetwork 3600 v2 Series Command Reference Manual

Field
Ext. Cost
Admin Tag
Src Count
Flag
Next Hop
Interface
ExitIndex

display isis spf-log

Syntax
display isis spf-log [ process-id | vpn-instance vpn-instance-name ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: Displays IS-IS SPF log information for the IS-IS process. The ID is in the range of 1 to
65535.
vpn-instance vpn-instance-name: Displays IS-IS SPF log information for the MPLS L3VPN.
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the IS-IS
SPF log information for the public network is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display isis spf-log to display IS-IS SPF log information.
Examples
# Display IS-IS SPF log information.
<Sysname> display isis spf-log
Level
SPF Log information for ISIS(1)
-------------------------------
Trig.Event
Description
External route cost.
Tag.
Count of advertising sources
Route state flag:
•
R—Indicates the route have been installed into the routing
table.
•
L—The route has been flooded in an LSP.
•
U—Route leaking flag. If it is UP, routes from L2 to L1 cannot
be advertised back to L2.
Next hop.
Outgoing interface.
Index of the outgoing interface.
No.Nodes
146
Duration StartTime