Display Bgp Routing-Table As-Path-Acl - HP FlexNetwork 3600 v2 Series Command Reference Manual

Table 48 Command output
Field
Total Number of
Routes
BGP Local router
ID
Status codes
Origin
Network
Next Hop
MED
LocPrf
PrefVal
Path
PrefVal
Ogn

display bgp routing-table as-path-acl

Syntax
display bgp routing-table as-path-acl as-path-acl-number [ | { begin | exclude | include }
regular-expression ]
View
Any view
Description
Total Number of Routes
BGP local router ID
Status codes:
•
* – valid—Valid route.
•
^ - VPNv4 best—Best VPNv4 route.
•
> – best—Best route.
•
d – damped—Dampened route.
•
h – history—History route.
•
i – internal—Internal route.
•
s – suppressed—Suppressed route.
•
S – Stale—Stale route.
ORIGIN attributes, including:
•
i – IGP—Originated in the AS.
•
e – EGP—Learned through EGP.
•
? – incomplete—Learned by some other means.
Destination network address
Next hop IP address
Multi-Exit Discriminator
Local preference value
Preferred value of the route
AS_PATH attribute, recording the ASs the packet has passed to avoid routing loops
Preferred value
ORIGIN attribute of the route, which can be one of the following values:
•
i—Indicates that the route is interior to the AS.
•
Summary routes and the routes injected with the network command are
considered IGP routes.
•
e—Indicates that the route is learned from the Exterior Gateway Protocol (EGP).
•
?—Short for INCOMPLETE. It indicates that the origin of the route is unknown and
the route is learned by other means.
207