Display Bgp Ipv6 Network - HP FlexNetwork 3600 v2 Series Command Reference Manual

Field
State

display bgp ipv6 network

Syntax
display bgp ipv6 network [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 network to display IPv6 routes advertised with the network command.
Examples
# Display IPv6 routes advertised with the network command.
<Sysname> display bgp ipv6 network
BGP Local Router ID is 1.1.1.2.
Local AS Number is 200.
Network
2002::
2001::
Table 82 Command output
Field
BGP Local Router ID
Local AS Number
Network
Prefix
Route-policy
Short-cut
Description
(when no session is established).
State machine state of peer.
Prefix Route-policy
64
64
Description
BGP Local Router ID
Local AS Number
Network address
Prefix length
Routing policy (A null value indicates no routing policy is configured.)
Shortcut route (A null value indicates the route is not a shortcut route.)
352
Short-cut
Short-cut