Peer Advertise-Ext-Community (Bgp/Bgp-Vpn Instance View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

undo peer { group-name | ip-address } advertise-community
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Description
Use peer advertise-community to advertise the COMMUNITY attribute to a peer/peer group.
Use undo peer advertise-community to disable the COMMUNITY attribute advertisement to a
peer/peer group.
By default, no COMMUNITY attribute is advertised to any peer group/peer.
Related commands: ip community-list, if-match community, and apply community.
Examples
# In BGP view, advertise the COMMUNITY attribute to peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test advertise-community
# In BGP-VPN instance view, advertise the COMMUNITY attribute to peer group test. (The VPN has
been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer test advertise-community
peer advertise-ext-community (BGP/BGP-VPN instance
view)
Syntax
peer { group-name | ip-address } advertise-ext-community
undo peer { group-name | ip-address } advertise-ext-community
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Description
Use peer advertise-ext-community to advertise the extended community attribute to a peer/peer
group.
228