Isis; Isis Authentication-Mode - HP FlexNetwork 3600 v2 Series Command Reference Manual

Examples
# Configure IS-IS process 1 to redistribute up to 1000 Level 1/Level 2 IPv4 routes.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] import-route limit 1000

isis

Syntax
isis [ process-id ] [ vpn-instance vpn-instance-name
undo isis [ process-id ]
View
System view
Default level
2: System level
Parameters
process-id: Process ID, ranging from 1 to 65535. The default is 1.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a
case-sensitive string of 1 to 31 characters. If no VPN is specified, the IS-IS process belongs to the
public network.
Description
Use isis to enable an IS-IS process and specify an associated VPN instance, enter IS-IS view, or
both.
Use undo isis to disable an IS-IS process.
Related commands: isis enable, network-entity.
Examples
# Enable IS-IS routing process 1, with the system ID being 0000.0000.0002, and area ID being
01.0001.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] network-entity 01.0001.0000.0000.0002.00

isis authentication-mode

Syntax
isis authentication-mode { md5 | simple } [ cipher ] password [ level-1 | level-2 ] [ ip | osi ]
undo isis authentication-mode [ { md5 | simple } [ cipher ] password ] [ level-1 | level-2 ]
View
Interface view
Default level
2: System level
Parameters
md5: Specifies the MD5 authentication mode.
]
159