Ripng Ipsec-Policy; Ripng Metricin - HP FlexNetwork 3600 v2 Series Command Reference Manual

Examples
# Enable RIPng 100 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng 100 enable

ripng ipsec-policy

Syntax
ripng ipsec-policy policy-name
undo ripng ipsec-policy
View
Interface view
Default level
2: System level
Parameters
policy-name: IPsec policy name, a string of 1 to 15 characters.
Description
Use ripng ipsec-policy to apply an IPsec policy on a RIPng interface.
Use undo ripng ipsec-policy to remove the IPsec policy from the RIPng interface.
By default, no IPsec policy is configured for the RIPng interface.
The IPsec policy to be applied must have been configured.
Examples
# Apply IPsec policy policy001 to VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng ipsec-policy policy001

ripng metricin

Syntax
ripng metricin value
undo ripng metricin
View
Interface view
Default level
2: System level
Parameters
value: Additional metric for received routes, in the range of 0 to 16.
Description
Use ripng metricin to specify an additional metric for received RIPng routes.
279