Display Ip Policy-Based-Route - HP FlexNetwork 3600 v2 Series Command Reference Manual

Precedence value
4
5
6
7
Description
Use apply ip-precedence to set a precedence for packets.
Use undo apply ip-precedence to remove the configuration.
Examples
# Set the precedence to 5 (critical) for packets.
<Sysname> system-view
[Sysname] policy-based-route aa permit node 11
[Sysname-pbr-aa-11] apply ip-precedence critical

display ip policy-based-route

Syntax
display ip policy-based-route [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip policy-based-route to display the PBR routing information.
Examples
# Display the PBR routing information.
<Sysname> display ip policy-based-route
Policy Name
pr02
pr02
pr01
Precedence type
flash-override
critical
internet
network
interface
local
Vlan-interface 10
Vlan-interface 11
440