Peer Keep-All-Routes (Bgp/Bgp-Vpn Instance View); Peer Log-Change (Bgp/Bgp-Vpn Instance View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

peer keep-all-routes (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } keep-all-routes
undo peer { group-name | ip-address } keep-all-routes
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Description
Use peer keep-all-routes to save original routing information from a peer or peer group, including
routes that fail to pass the inbound policy (if configured).
Use undo peer keep-all-routes to disable this function.
By default, the function is not enabled.
Examples
# In BGP view, save routing information from peer 131.100.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 131.100.1.1 as-number 200
[Sysname-bgp] peer 131.100.1.1 keep-all-routes
# In BGP-VPN instance view, save routing information from peer 131.100.1.1. (The VPN has been
created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer 131.100.1.1 as-number 200
[Sysname-bgp-ipv4-vpn1] peer 131.100.1.1 keep-all-routes

peer log-change (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } log-change
undo peer { group-name | ip-address } log-change
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
245