Reset Isis Peer; Set-Overload - HP FlexNetwork 3600 v2 Series Command Reference Manual

Description
Use reset isis all to clear all IS-IS data structure information.
No data structure information is cleared by default.
This command is used when the LSP needs to be updated immediately. For example, after
performing the area-authentication-mode and domain-authentication-mode commands, you can
use this command to clear old LSPs.
Related commands: area-authentication-mode, domain authentication-mode.
Examples
# Clear all IS-IS data structure information.
<Sysname> reset isis all

reset isis peer

Syntax
reset isis peer system-id [ process-id | vpn-instance vpn-instance-name ]
View
User view
Default level
2: System level
Parameters
system-id: Specifies the system ID of an IS-IS neighbor.
process-id: Clears the data structure information of an IS-IS process with an ID from 1 to 65535.
vpn-instance vpn-instance-name: Clears the data structure information of the MPLS L3VPN.
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the data
structure information of the public network is cleared.
Description
Use reset isis peer to clear the data structure information of a specified IS-IS neighbor.
This command is used when you need to re-establish an IS-IS neighbor relationship.
Examples
# Clear the data structure information of the neighbor with the system ID 0000.0c11.1111.
<Sysname> reset isis peer 0000.0c11.1111

set-overload

Syntax
set-overload [ on-startup [ [ start-from-nbr system-id [ timeout1 [ nbr-timeout ] ] ] | timeout2 ]
[ allow { external | interlevel } * ]
undo set-overload
View
IS-IS view
Default level
2: System level
180